Pick up a router and you’ll notice there are two antennas on the back. It makes sense that these help with connectivity, right? Wrong! In many cases having strong signals with your current hardware is just not enough. These five tips will improve your signal range by nearly doubling it in some situations.
The “how to increase wifi range of router” is a handy guide that will show you 5 ways to boost your router’s signal range. These tips will help you get the most out of your wireless network by boosting its signal and increasing its coverage area.
It’s rare these days to find oneself without internet access in most sections of the nation, thanks to widespread internet penetration. While cellular data is convenient, most individuals prefer to use their home Wi-Fi network. Most internet providers will provide you with a wireless router gateway so you may set up a Wi-Fi network in your house. A rental price for equipment, such as your router, may be included in your Spectrum payment.
We have, however, become used to internet connectivity and the rapid satisfaction it provides. As a result, being out of range of your Wi-Fi network might be quite inconvenient. You may still be connected, but the signal will deteriorate as you go farther away. If your room or location is towards the limit of your router’s range in a bigger residence, you may have an extremely disrupted internet experience. But before you spend the money on a new router, consider these five helpful recommendations first:
Place the Router in a Different Location
The first thing you can do to increase your Wi-Fi range is to relocate your wireless router. In general, putting the router as near to the middle of your house as possible is a good approach to spread coverage. However, this is not always the case, and it is sometimes impractical to do so. When this occurs, attempt to position the router as near as possible to the areas where the internet is used the most. Great examples are your bedroom, living room, and home office.
High-Gain Antennas should be used instead of standard antennas.
By default, most routers have omnidirectional antennas. These common antennas simultaneously transmit Wi-Fi signals in all directions. You may, however, readily replace them with high-gain antennas. These antennas are directional, which means they will deliver signals in the direction you aim them. Once your antennas are up and running, check sure any devices that connect to the internet are pointing in the direction your antennas are transmitting from. This should provide a boost in range in certain directions.
Place the Router as far away as possible from any obstacles.
It’s tempting to believe wireless signals are everywhere just because you can’t see them. However, radio transmissions, such as those sent by your router, might suffer from interference. Passing past barriers, in particular, reduces the intensity and range of wireless signals. The weaker the signal, the more obstructions between the router and your access point. As a result, to maintain signal strength and network quality, keep your router away from glass, metal, and even thick concrete.
Changing Wireless Channels is a good idea.
Wi-Fi transmissions are essentially radio waves, as we explained before. That your router is broadcasting a network via radio frequencies or channels suggests it is broadcasting a network. 2.4 GHz is the most common frequency range. You might anticipate your router to interfere with your Wi-Fi quality if it transmits on a frequency or channel that is already overcrowded. While most routers have automated channel switching, you may also try manually setting frequencies. Find the frequency that gives you the maximum range with the least amount of signal loss.
Remove any nearby appliances that might cause a snag.
Finally, various household items that are found in almost every home might interfere with the functionality of your network. When operating, some gadgets might impede network range by interfering with your router’s broadcasting channel. When you use a microwave oven to warm up your meal, for example, radio waves are released. If your router is close enough, you can notice a decline in signal strength as soon as the microwave is turned on.
Other devices, such as cordless landline phones and baby monitors, use the same channels as your router. Refrigerators, water heaters, and cellphones all have the potential to degrade signal strength. It’s possible that you won’t be able to change or delete all of these items. However, even a little adjustment may improve the range and performance of your Wi-Fi network.
Conclusion
A wireless router is a highly useful piece of equipment to have in your home. It has the ability to link dozens of devices to the same Spectrum internet connection at once. It works with any Wi-Fi-enabled device, including your phone, tablet, computer, smart TV, and even wearable technology, although there are certain limits. If none of these methods succeed in extending the router’s range to your satisfaction, you may need to upgrade to a better router. However, they are not inexpensive, particularly those developed for professional gamers. In such instances, it could be a good idea to test out the recommendations above before investing in new Wi-Fi equipment.
Watch This Video-
The “how to increase wifi internet speed” is a guide on how to boost your router’s signal range. The 5 ways mentioned in the article are: moving your router, changing the channel, using a Wi-Fi extender, adding a wireless repeater, and putting it away from metal objects.
Related Tags
- how to boost wifi signal with aluminum foil
- how to boost wifi signal through walls
- why is my wifi signal weak all of a sudden
- how do i extend my wifi signal to another building 400 feet away
- how to increase wifi range in house
